Socket Weld Cap
Description
The expansion gap and internal crevices left in socket-welded systems promotes corrosion and make them less suitable for corrosive or radioactive applications where solids buildup at the joints may cause operating or maintenance problems. Generally require butt welds in all pipe sizes with complete weld penetration to the inside of the piping.
Specification
1 Socket weld cap
2. Material: Carbon steel; stainless steel and LOW Cr-Mo ALLOY STEEL
3. Size: DN6-DN100
4. Socket Weld Pipe Cap Type: Socket Weld Cap
5. Pressure: 3000Lbs - 6000Lbs -9000Lbs
6. Standard: GB/T14383SH 3410HG/T 21634ASME B 16.11JIS B2316
Socket Weld Pipe Cap Application:
Socket weld cap are used to seal the end of pipe.
Nominal
Diameter |
Depth of Socket |
Dimension of Socket |
Wall Thickness |
End Wall Thickness |
The length of midst |
Center to Bottom of Socket |
|
Cmin |
Kmin |
Coupling |
Half-
Coupling |
45o
Lateral |
|
A |
H |
|
DN |
NPS |
Jmin |
d1 |
3000
LB |
6000
LB |
9000
LB |
3000
LB |
6000
LB |
3000
LB |
E |
F |
3000
LB |
6000
LB |
3000
LB |
6000
LB |
|
Sch80 |
Sch160 |
XXS |
Sch80 |
Sch160 |
XXS |
Sch80 |
Sch160 |
Sch80 |
Sch160 |
|
6 |
1/8 |
10 |
10.7 |
3.2 |
3.5 |
- |
5.0 |
6.5 |
- |
6 |
16 |
- |
- |
- |
- |
|
8 |
1/4 |
10 |
14.1 |
3.3 |
4.0 |
- |
5.0 |
6.5 |
- |
6 |
16 |
32 |
- |
8 |
- |
|
10 |
3/8 |
10 |
17.5 |
3.5 |
4.4 |
- |
5.0 |
6.5 |
- |
6 |
17 |
37 |
- |
8 |
- |
|
15 |
1/2 |
10 |
21.8 |
4.1 |
5.2 |
8.2 |
6.5 |
8.0 |
11.0 |
10 |
22 |
41 |
51 |
11 |
13 |
|
20 |
3/4 |
13 |
27.4 |
4.3 |
6.1 |
8.6 |
6.5 |
8.0 |
12.5 |
10 |
24 |
51 |
60 |
13 |
14 |
|
25 |
1 |
13 |
34.2 |
5.0 |
7.0 |
10.0 |
9.5 |
11.0 |
14.0 |
13 |
29 |
60 |
71 |
14 |
18 |
|
32 |
1.1/4 |
13 |
42.9 |
5.3 |
7.0 |
10.6 |
9.5 |
11.0 |
14.0 |
13 |
30 |
71 |
81 |
18 |
21 |
|
40 |
1.1/2 |
13 |
48.3 |
5.6 |
7.8 |
11.2 |
11.0 |
12.5 |
16.0 |
13 |
32 |
81 |
98 |
21 |
25 |
|
50 |
2 |
13 |
61.1 |
6.1 |
9.5 |
12.2 |
12.5 |
16.0 |
19.0 |
19 |
41 |
98 |
120 |
25 |
29 |
|
65 |
2.1/2 |
16 |
76.9(73.8) |
7.7 |
12.5 |
- |
16.0 |
19.0 |
- |
19 |
43 |
- |
- |
- |
- |
|
80 |
3 |
16 |
89.8 |
8.3 |
13.8 |
- |
19.0 |
22.0 |
- |
19 |
45 |
- |
- |
- |
- |
|
100 |
4 |
19 |
115.5 |
9.4 |
- |
- |
22.0 |
28.5 |
- |
19 |
48 |
- |
- |
- |
- |
Note: Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas. |
Plastic Extrusion Plant
